Products產品介紹
G-405 Quad channel UHD video wall controller with 4k loop out
G-405 is 4 channel video wall controller. It was designed with two processing modules. Each processing module consists of 4 input and two HDMI output ports. It can supports 4k/2k input source and show single or dual contents across 4 LCDs. Users can easily build a 4k/8K video wall with G-405.  Largest video wall can be up to 15x15 from single video source. It can crop image for creative video wall. The image can be up/down flip for easy use of conventional TV or monitors to compensate dimensions difference at top and bottom bezels. Pixel by pixel precise position and bezel alignment. 4K/2K Loop out port for easy daisy chain connection among multiple unit cascade. System can be controlled via remote control or RS232. No PC or special software is required.
 
Feattures:
  • Max input: 4k/2k @30Hz and 3840x1080 @60Hz with 4:4:4 full sampling
  • Connectivity: any signal source from PC, media player, PlayStation, Xbox, Blue Ray...
  • Structure: each G-405 consists of two processing modules. Each display module consists of 4 input and two output ports. It can build a video wall using 4 LCDs with single or dual display contents. Multiple units can build larger video wall without number limitation.
  • True 4k/2K display: User can build true 4k/2k display using one G-405 and 4x LCDs or 8k/4k display with 4x G-405 and 16 FHD LCDs.
  • Projector: Serve as image splitter and set overlap pixel for projector edge blending.
  • Position shift: image shift pixel by pixel at H&V position up to 900 pixels for irregular creative video wall.
  • LCD: Work with any high end or low cost LCD without matrix control. Conventional TV and monitor can be used at top/down flip position for bezel balance.
  • Video switcher: Multiple input ports to serve as video switcher.
  • 4k HDMI loop out port: for daisy chain connection in multiple unit cascade application.
  • Simplify high resolution video wall system. No image lag or synchronization issue.
  • Processor: 10-bits high end video processor with 3D motion adaptive de-interlace, low angle smooth algorithm and 3:2/2:2 film mode processing.
  • Aspect ratio adjustment: flexible, able to display 2.35:1 movie in 16:9 screen without blanking borders.
  • Arbitrary image cropping (zoom in/out)
  • Work with other GeoBox for PIP/POP and image rotation/flip.
  • Portrait video wall can be achieved using 90 degrees rotation image.
  • Capable of multi-view display.
  • Frame lock: to synchronize all displays with input signal without frame tear.
  • Custom display setting: save up to 5 custom settings.
  • Control: IR remote controller and RS232.
  • No PC or software is required.

Application case study

a. Display with all kind of panel without matrox control


b.  True 4k/2k video wall display



C. True 8k/4k video walll display



D.  Mulitple content display



E. Top/Down flip video wall for conventional TV or monitor



F. Portrait display with content 90 degrees rotation



G. Simplify video wall with matrix control panel for 4k display



H. 8x8 video wall display



I. Creattive video wall via H& V position shift up to 900 pixels



J. Chage aspect ratio 



K. Irregular video wall (co-work with G-101)

Main items Functions G-403 G-405
General description   Quad LCD video wall controller with preset display modes and custom modes created by user 4k/2k quad LCD video wall controller for LCD array at portrait and landscape direction
Main functions Video processor 10-bits 10-bits
LCD controlled by one processor 4 4
Max. display contents in 4 LCDs 2 (PIP/POP) 2 (two processing modules)
Modular cascade for large display like Lego Yes Yes
Video wall with portrait LCD without rotating input source Yes Need portrait content
Video wall with PIP/POP Yes -
Max. source resolution shared to 4 LCDs FHD 4k/2k
Share 4k/2k input in multiple units cascade Yes Yes
Preset modes selected by dip SW Yes No preset mode
Looping playback and dynamic position shift for LCD life protection Yes -
Input & Output Video Input Ports  1x DisplayPort, 1x HDMI, 1x DVI-I (DVI-D, VGA, HDMI)  1x DisplayPort,2x HDMI, 1x DVI-I (DVI-D, VGA, HDMI)
Video Output 4x HDMI 4x HDMI
4k/2k HDMI loop out port for daisy chain Yes Yes
Audio Output HDMI audio HDMI audio
Support YPbPr video via VGA input port Yes Yes
Support DVI-D, VGA & HDMI by DVI-I input port Yes Yes
4k/2k @30Hz, 1080p @120Hz, 2560x1600 / 3840x1080 @60Hz input with 4:4:4 sampling Yes Yes
Frame Lock for system synchronization Yes Yes
Selective EDID for optimized video quality Yes Yes
HDCP compliant Yes Yes
Image rotation Image 90〫/270〫 flip and rotation Yes
(All LCD at the same time)
-
Image 180〫 flip and rotation Yes
(All LCD at the same time)
Yes (For individual LCD)
 
 
Video wall
Max. source resolution shared to 4 LCDs FHD 4k/2k
Share 4k/2k input in multiple units cascade Yes Yes
4K input source can be split and assigned for each display unit to build one large video wall. Yes Yes
Image location can be adjusted up to +_900 pixels in all directions for image mapping Yes Yes
Custom display modes created by user with LCD at any position and angle Yes Only LCD at portrait and landscape direction
Looping playback for custom modes Yes -
Image shift for LCD protection Yes -
PIP (Picture in Picture) and POP (side by side) PIP up to 1024x768 at selectable location with selectable aspect ratio and input source Yes -
POP to show two image in one video wall with full screen or keep original aspect ratio Yes Yes
High end 3D motion adaptive de-interlace in PIP/POP windows Yes Yes
Video processing 10 bits 4:4:4 full bandwidth sampling with 3D de-interlace, smooth edge algorithm and 3:2/2:2 film mode detecting and recovery Yes Yes
High quality video and graphics scaling up and scaling down Yes Yes
Color adjustment for one display unit (Hue, saturation, sharpness, contrast, brightness, preset modes, discrete RGB) Yes Yes
System control for easy use Full function IR Remote controller Yes Yes
Cabled IR Receiver Extender (up to 20 meters) Yes Yes
Ethernet control and operation via LAN or WiFi (NB, iPad, Smart phone) Yes, need to add external Ethernet to UART module Yes, need to add external Ethernet to UART module
ASCII control protocol over RS-232 Yes Yes
Auto Shut off output signal when input is missing Yes Yes
No PC, OS or special tool required Yes Yes
Ear mount screw holes Yes Yes
Dimension & weight Only Box body, not including remote controller, power supply and packing 330x160x35mm, 1.5kg 303x155x55mm, 1.8kg
About Us|Message|Technical support|FAQ|Contact Us |中文
Address:3F, No.27, Ln. 66, Ruiguang Rd., Neihu, Taipei 114, Taiwan (R.O.C.)
TEL: 886-2-2792-2819 | Fax: 886-2-8792-8736 | Email: sales@vnstw.com | Skype: vns-inc
COPYRIGHTS© 2011 VNS.INC ALL RIGHTS RESERVED. DESIGN BYWELI