Image cropping/ rotation/ PIP/ POP processor
G-101 is a professional image processor for image switching, format conversion, geometric correction, 3D decoding, image rotation, image flip, image cropping and PIP/POP multiple display functions through front panel OSD and IR remote controller. It can directly connect with Blue Ray DVD, PC, Set Top Box, Media Player and many other video sources.
Input and output:
  • Video Input: 1xHDMI, 1x VGA, 1x DVI, 1x DisplayPort, 1x YPbPr
  • Max. input resolution: 4K/2K @30HZ。
  • Video Output: 1x HDMI, 1x VGA,Max. output resolution 1920*1200。
  • Audio input: HDMI embedded audio、analog R/L RCA、PC audio jack。
  • Audio output: 1x SPDIF RCA output、 HDMI embedded audio、analog R/L RCA。
  • DisplayPort and HDMI/DVI support WQXGA & 3840x1080 @60Hz、4k/2k @30Hz input with 4:4:4 full color sampling without compression.
Warp and geometry alignment:
  • Patented warp technology for accurate geometry alignment.
  • Quick corner adjustment, H&V keystone correction, pincushion and barrel adjustment, image rotation and image flip.
  • Image edge mask
  • 16:9 and 2.35:1 aspect ratio conversion
Active and passive 3D:
  • Decoding 3D formats from Blue Ray, Set Top Box, PC…for dual projector passive 3D display.
  • Convert active 3D signal up to 1080p @120Hz for FHD passive 3D display.
  • Support HDMI 1.4a 3D formats, including 1080p/24Hz frame packed, Side by Side, Top-Bottom, Line interleave and frame sequential for passive 3D display.
  • Support 3840x1080 side by side and 1080i/60Hz frame packed 3D from Sony FHD camcorder.
  • Support PIP function in passive 3D display, both main and PIP windows are still with 3D effect.
  • Special algorithm for perfect synchronization in RH/LH channels to get the most comfortable passive 3D display.
  • Support passive 3D image geometry alignment, curved screen display, image stacking and edge blending.
  • Support DLP-Link 3D Ready or Nvidia 3D Vision active 3D for image warp (for curved screen display), image stacking (enhance brightness) and edge blending (enlarge display screen). The output resolution is limited to XGA/720p 120Hz but not FHD 120Hz.
  • Convert 1080p/24Hz frame packed 3D from Blue Ray or 1080p/120Hz active 3D signal from PC or Nvidia 3D Vision card into 720p/XGA 120Hz signal for active 3D display.
High end video processing
  • 10-bit high bandwidth processor with 3D motion adaptive de-interlace, low angle algorithm and 3:2/2:2 movie mode detecting and recovery.
  • With Picture-in-Picture function (PIP) at any location of the image up to XGA resolution.
  • Intelligent color adjustment, including preset display modes, hue, saturation, brightness, contrast sharpness adjustments and RGB separate adjustment for color fine tune.
Video wall function
  • Video wall function to split, crop and magnify the image with pixel based overlap region and bezel adjustment.
  • Video wall control & edge blending up to 15x15 matrix displays.
  • Image flip and rotation function can be applied to video wall to provide irregular video wall display.
Image flip and rotation
  • Built-in image Flip function in Horizontal and Vertical directions or both. This function is convenient for rear projection and system installation.
  • Image 90/180/270 degrees rotation with original aspect ratio or full screen. It is good for digital signage application. Please note that when implement 90/270 degrees image flip, it will not apply 3D motion adaptive de-interlace. Please apply progressive (i.e. 720p, 1080p) or PC signal to avoid image flickering in still image.
  • Continuous +_0-128 degrees rotation under 1400x1050 output resolution. +_24 degrees in FHD output resolution.
PIP [Picture in Picture] & POP [side by side]
  • PIP function with selectable input selection in both main and PIP display windows
  • Max. PIP size is 1024x768 resolution
  • Flexible image size, aspect ratio, position adjustment through OSD keypad or IR remote controller
  • POP function with selectable full screen or original aspect ratio.
System control & others
  • Reliable and durable design for long term industrial and commercial applications.
  • Full functional keypads & IR control.
  • With internal grid pattern for quick and easy setup.
  • ID # for each GeoBox. Convenient for system installation and control through IR, RS232 and Ethernet.
  • keypad Lock (press menu for 5 seconds) to avoid setting loss due to negligence..
  • Multiple profile settings for flexible display modes memory and recall.
  • Integrated with IR extender (up to 20 meters), RS-232 and optional Ethernet control.
  • Dimension and weight: 440x189x45mm, 2.35kg
Application case study:
  1.  Video switcher and format conversion
2. Aspect ratio conversion

3. Image warp and geometry alignment

4. Mobile phone image display on portrait TV with full screen display

5. Image flip and rotation

Image rotation and maintain original aspect ratio

Image flip at Top/Bottom, Right/Left & Rear/Front directions with full screen

Image flip and keep original aspect ratio

7. Image cropping at any location

Image cropping at any location

Image flip or rotation and cropping

8. Image PIP/POP

About Us|Message|Technical support|FAQ|Contact Us |中文
Address:3F, No.27, Ln. 66, Ruiguang Rd., Neihu, Taipei 114, Taiwan (R.O.C.)
TEL: 886-2-2792-2819 | Fax: 886-2-8792-8736 | Email: | Skype: vns-inc