Products產品介紹
G-106 Warp processor
G-106 is multiple purpose video processor with warp, de-warp, video wall control, format conversion, scaler switcher, PIP/POP, 3D format conversion, image cropping and flip/rotation. Advanced warp technology is embedded in G-106. User can use front panel keypad, IR controller or PC to perform edge blending and sophisticated geometry alignment up to 17x17 grids. Each corner geometry adjustment range is up to H:+_1200 pixels and V: +_800 pixels in full HD output through remote controller.
 
G-106 is multiple purpose video processor with warp, de-warp, video wall control, format conversion, scaler switcher, PIP/POP, 3D format conversion, image cropping and flip/rotation. Each G-106 has 3 input ports (1x HDMI, 1x DP, 1x DVI-I) to support 5 input formats (HDMI, DP, VGA, DVI-D, YPbPr) and 1x 4K HDMI output port. One HDMI loop out port can provide raw signal output for daisy chain connection to other processor.
Input ports support up to 3840x1080 @60Hz and 4k UHD @30Hz resolution with 4:4:4 full color sampling. It is integrated with 10-bit high end processor with motion adaptive de-interlace, low angle smooth algorithm and 3:2/2:2 pull-down film mode processing.
PIP (picture in picture) and POP (side by side) are standard functions. It can display two landscape contents on one portrait LCD at top/bottom position.
Advanced warp technology is embedded in G-106. User can use front panel keypad, IR controller or PC to perform edge blending and sophisticated geometry alignment up to 17x17 grids. Each corner geometry adjustment range is up to H:+_1200 pixels and V: +_800 pixels in full HD output through remote controller.
G-106Ex can perform curved screen edge blending with color adjustment and white balance correction. Edge blending region gamma correction and non-edge blending area black level uplift are also standard function in G-106Ex.
HDMI loop out supports daisy chain connection up to 3840x1080 @60Hz or 4k/2k @30Hz and allows display with multiple G-106 cascaded. Video wall function in G-106 is to crop and allocate source image for each projector. Complete curved edge blending can be achieved without PC, video distributor and splitter.
In order to optimize video performance, G-106 is designed to support non-VESA standard input timing and allow user to create any EDID timing in the range between 1024x768 and 3840x2160.
G-106 is an ideal solution for image geometry alignment, image warp/de-warp, PIP/POP and image flip/rotation. It provides easy configuration, low entry barrier, cost effective, reliable and flexible solution.
1. Input and output:
  • Input ports: 1x HDMI, 1x DisplayPort and 1x DVI-I (support HDMI, DVI, VGA, YPbPr input signals)
  • HDMI & DisplayPort support 4k/2k @30Hz, WQXGA & 3840x1080 @60Hz with 4:4:4 sampling without compression.
  • DVI-I port: if the input is through HDMI cable, it can support 4k/2k @30Hz. If input from DVI or VGA signal source, it can only support up to 1920x1200 @60Hz.
  • Connect with all kinds of video sources and support none VESA standard input resolution.
  •  Output ports: 1x HDMI. Preset output resolution: 720x480、XGA、WXGA、1280x1024、1366x768、1400x1050、1600x1200、1920x1080 & 1920*1200。
  •  Loop out port: 1x HDMI (supports 3840*2160@30Hz) for daisy chain connection and monitoring.
2. Warp and geometry alignment:
  • With full functions for quick 4 corner alignment, vertical and horizontal keystone correction, Pincushion & Barrel adjustment, image warp and image rotation and flip.
  • Each unit controls one projector and can be expanded with multiple G-106 to support unlimited number of projectors.
  • Integrated with full function front panel keypads and IR remote controller. Manual geometry alignment up to 9*5 grid patterns. The geometry adjustment range is up to +_600 in horizontal direction and +_400 pixels in vertical direction at one side in FHD output.
  • PC software tool is available for warp and geometry alignment up to 17x17 grid pattern. After finishing geometry alignment, the parameters can be stored inside G-106, then no more PC is needed. The geometry adjustment range will be double if compared with remote controller adjustment, i.e. H=+_1200 pixels and V=+_800 pixels in full HD output resolution.
  • Through applying serial connection among several processing modules, user can expand geometry alignment range. It is convenient for special application required extreme big geometry adjustment range.
3. Edge Mask: Able to do edge mask with black background in each edge up to 500 pixels.

4. Image stacking 
Image stacking for flat and curved screen with multiple projectors to increase brightness.
5. PIP/POP Multiple windows display
  • PIP function with selectable input selection in both main and PIP display windows
  • Flexible image size, aspect ratio, position adjustment through OSD or IR controller
  • Max. PIP size is 1024x768 resolution
  • POP function with selectable full screen or original aspect ratio.
  • Dual landscape contents displayed at portrait TV.

6. Image flip
  • Image flip at 90/180/270 degrees with full screen display
  • Image flip at Front/Rear, Right/Left, Top/Bottom direction
7. Dual landscape contents displayed on portrait LCD
8. High end video processing
  • 10-bit high bandwidth processor with 3D motion adaptive de-interlace, low angle algorithm and 3:2/2:2 film mode detecting and recovery.
  • Support up to 4k/2k @30Hz input with 4:4:4 full color sampling without compression.
  • Color adjustment, including preset display modes, hue, saturation, brightness, contrast sharpness adjustments and RGB separate adjustment.
9. 3D signal conversion
In additional projector active 3D and passive 3D application, G-105 can convert below 3D formats into one Side by Side 3D format output to meet the requirement in most of 3D display:
  • RH/LH discrete 3D format
  • Line by line (line interleaved)
  • Frame packing
  • Frame sequential
  • Top-bottom 3D.
About Us|Message|Technical support|FAQ|Contact Us |中文
Address:3F, No.27, Ln. 66, Ruiguang Rd., Neihu, Taipei 114, Taiwan (R.O.C.)
TEL: 886-2-2792-2819 | Fax: 886-2-8792-8736 | Email: sales@vnstw.com | Skype: vns-inc
COPYRIGHTS© 2011 VNS.INC ALL RIGHTS RESERVED. DESIGN BYWELI