Call:886-2-2792-2819

G-106 Medical 3D format converter

Quick Overview

G-106 is multiple purpose video processor with warp, de-warp, video wall control, format conversion, scaler switcher, PIP/POP, 3D format conversion, image cropping and flip/rotation. Each G-106 has 3 input ports (1x HDMI, 1x DP, 1x DVI-I) to support 5 input formats (HDMI, DP, VGA, DVI-D, YPbPr) and 1x HDMI output port. One HDMI loop out port can provide raw signal output for daisy chain connection to other processor.

G-106 is multiple purpose video processor with warp, de-warp, video wall control, format conversion, scaler switcher, PIP/POP, 3D format conversion, image cropping and flip/rotation. Each G-106 has 3 input ports (1x HDMI, 1x DP, 1x DVI-I) to support 5 input formats (HDMI, DP, VGA, DVI-D, YPbPr) and 1x HDMI output port. One HDMI loop out port can provide raw signal output for daisy chain connection to other processor.

Input ports support up to 3840x1080 @60Hz and 4k UHD @30Hz resolution with 4:4:4 full color sampling. It is integrated with 10-bit high end processor with motion adaptive de-interlace, low angle smooth algorithm and 3:2/2:2 pull-down film mode processing.

PIP (picture in picture) and POP (side by side) are standard functions. It can display two landscape contents on one landscape or portrait LCD at top/bottom position.

Advanced warp technology is embedded in G-106. User can use front panel keypad, IR controller or PC to perform edge blending and sophisticated geometry alignment up to 17x17 grids. Each corner geometry adjustment range is up to H:+_600 pixels and V: +_400 pixels in full HD output through remote controller. If using PC tool, the range can be up to H:+_1200 pixels and V: +_800 pixels in full HD output.

HDMI loop out supports daisy chain connection up to 3840x1080 @60Hz or 4k/2k @30Hz and allows display with multiple G-106 cascaded. Video wall function in G-106 is to crop and allocate source image for each projector. Complete curved edge blending can be achieved without PC,

In order to optimize video performance, G-106 is designed to support non-VESA standard input timing and allow user to create any EDID timing in the range between 1024x768 and 3840x2400.
G-106 is an ideal solution for image geometry alignment, image warp/de-warp, PIP/POP and image flip/rotation. It provides easy configuration, low entry barrier, cost effective, reliable and flexible solution.

3D format conversion:

Convert Line by Line (Line Interleaved) and frame sequential 3D format into side by side 3D format for the display in most of 3D display devices.

  • Convert HDMI 1.4 standard 3D format (including frame packed, Top/bottom 3D) into side by side 3D format.
  • Convert dual camera 3D format into side by side 3D format. 

Active 3D application:

  • Convert 1080p 120Hz active 3D into 720p/XGA 120Hz for 3D Ready DLP active 3D.
  • Geometry alignment for active 3D signal, including Line Interleaved, Frame Sequential 3D formats.
  • Support DLP-Link 3D Ready or Nvidia 3D Vision active 3D for image warp (for curved screen display), image stacking (enhance brightness) and edge blending (enlarge display screen). The output resolution is limited to XGA/720p 120Hz only.
  • Convert 1080p/24Hz frame packed 3D from Blue Ray or 1080p/120Hz active 3D signal from PC or Nvidia 3D Vision card into 720p/XGA 120Hz output for active 3D display.

Passive 3D application:

  • Decoding 3D formats from Blue Ray, Set Top Box, PC…for dual projector passive 3D display.
  • Support HDMI 1.4a 3D formats, including 1080p/24Hz frame packed, Side by Side, Top-Bottom, Line interleave and frame sequential for passive 3D.
  • Support 3840x1080 side by side and 1080i/60Hz frame packed 3D from Sony FHD camcorder.
  • “Perfect Sync” algorithm for ZERO latency between RH/LH channels to get the most comfortable passive 3D display.
  • Support passive 3D image geometry alignment, curved screen display, image stacking and edge blending.