En
中文
Call:886-2-2792-2819
Home
products

G901 Quad view with seamless switcher

Quick Overview

The major function of G901 is the same as S901. The only difference is that S901 is designed with front panel keypads for real time and quick input switching and function change but G901 is not. If user only needs some fixed function or doesn't need to switch input source or change display mode frequently, G901 will have more cost advantage due to lower price.

 

Major applications:

  • 5x1 seamless switcher with UHD input/output
  • MultiViewer function to display 2/3/4 split views for UHD display.
  • Front end processor for multiple projector edge blending, LED and video wall system.
  • Image rotation processor for display system.
  • Co-work with other G900 models for video wall with odd number of monitors. One G901+ two G904 can build 3x3 video wall with UHD monitors.
  • Mobile game displayed on portrait TV set.
  • The most powerful PIP/POP function for big display system with flexibility to change sub-window direction, cropping area, position, color and aspect ratio.
  • Interface to accept non-VESA standard timings from various input timing up to 4096*2160 @60Hz, 7680*4320 @30Hz or 600MHz.
  • High quality video up/down scaler with selectable output timings and refresh rate.
  • Scaling down 8k/4k signal into low resolution.
  • True 10-bit processor to keep smooth gradient color.
  • Cropping specific image area for selectable output resolution & refresh rate.
  • 3D format conversion for medical and dual camera 3D source.

 

  • Input ports: 3x HDMI 2.0b, 2x DP1.4
  • input: 4096*2160 @60fps or 7680*2160 @30fps in HDMI and 7680*4320 @30Hz (true 8k/4k @30Hz) in DisplayPort input.
  • Supports interleaved and progressive input signals with 4:4:4 10-bit color
  • Support High Dynamic Range (HDR): SMPTE ST-2084, SMPTE ST-2086 and BT.2020 HDR 10 input signal processing.
  • Support non-VESA standard input timings with scaling up and scaling down function.
  • Programmable Output: 1x HDMI 2.0b up to 4096*2253@60fps or 4096*2730 @50fps
  • The output range is from 800-7680 in horizontal (8 pixel/step under 230Mhz, 16 pixel/step above 230Mhz) and 600-3840 in vertical (1 pixel/step) (maximum pixel clock is 600MHz).
  • Output signal: SDR, progressive full color RGB 4:4:4 10-bits.
  • Preset 17 output timing modes with 8-bit/10-bit color and 24/30/50/60/100/120Hz refresh rate selection.
  • HDCP: V2.2/V1.4 in HDMI & V2.2 in DP ports.
  • Embedded video wall function for image split, cropping, location assignment and position adjustment.
  • Flexible aspect ratio adjustment in each edge up to +_ 1800 pixels.
  • Support xvYCC color processing & 8/10/12-bit deep color input signal.
  • One frame latency: 16.7ms (V=60Hz)
  • Programmable EDID in the range at H= 1024-4080 (8 pixels/step), V= 720-3840 (1 pixel/step)
  • PIP/POP function with PIP image size from 320*180 up to 1920*1200 resolution with flexible position, rotation/flip and selectable aspect ratio.
  • POP image can be at side by side or Top/Bottom. Main and sub-image can be rotated / flipped with flexible aspect ratio adjustment.
  • Two input signals can be swapped seamless through remote controller shortcut key.
  • Individual color adjustment in main and sub-images.
  • One G901 can display 4 types of 3 split views on one landscape or portrait UHD monitor. 4 split views can only be displayed in landscape monitor. Input resolution supports up to 4k/2k 60Hz.
  • Frame lock for multiple unit synchronization.
  • 10-bit processor, 3:2/2:2 cadence, low angle smooth algorithm
  • High quality scaling engine for image scaling up and down in the range from XGA to UHD.
  • 3D motion adaptive de-interlace for interleaved input.
  • Individual 90/180/270 rotation, flip, cropping, scaling & color adjustment up to 4k/60 input.
  • Embedded HDMI audio output. User can select audio from main or sub-image signal source.
  • OSD menu position can be shifted for convenient OSD operation.
  • Decode 3D signal for passive 3D display and convert 3D format into side by side, Top/Bottom or frame sequential output.
  • ESD Protection: ±15kV (Air-gap discharge), ±8kV (Contact discharge)
  • DC power supply: DC adapter: 12V 2A (100V-240V), max. Power consumption: 0.6A (7.2w)
  • Working environment: 45〫C, 10-90% RH
  • Control: IR, RS232, USB, Ethernet
  • 10 system settings can be stored and backup.
  • Dimensions (Body only): 220mm*161mm*41mm (without protruding parts).
  • Weight: 0.87 kg (body only)
  • CE/FCC/RoHS Certified 2 Year Warranty, extension package is available up to 5 years.

Related Products