UD101L UHD 3D format converter with warp
Quick Overview
UD101L is multiple purpose 4k warping processor with 3D format conversion function. The major difference with G901 is that UD101L is embedded with warp function. All the other 3D convertion function is the same as G901.
User can use IR controller, USB, Ethernet or WebGui to perform all the setup.
Warp function together with 3D function has below advantages:
1. In dual camera discrete RH/LH 3D format conversion, user can use warp function to correct the image distortion in optical system to get the best 3D quality.
2. When user uses two UD101L for passive 3D display, it can align two projector images perfectly stacking together to get the best passive 3D display.
3. In Frame Sequential output for active 3D display, it can align the image to match the screen, including the border, curvature and distortion.
- Input: 3x HDMI 2.0b, 1x DP1.4, Output: 1x HDMI 2.0, input seamless switcher function can be selected.
- Loop output: 1x HDMI 2.0b for audio and daisy chain connection.
- HDCP compliance: Input: HDMI: HDCP V2.2/V1.4, DP: HDCP: V1.3, Output: HDCP V2.0/V1.4.
- Input resolution: DisplayPort: 7680*4320 @30Hz, HDMI: 7680*2160 @30Hz, 7680*1200 @60Hz, 4096*2400 @50Hz, 4096*2160 @60Hz.
- Input supports progressive and interlaced RGB/YUV signal, 4:4:4 Chroma sampling, up to 30 Color bits.
- Support non-VESA standard input timings for easy connection with various signal sources.
- 16 selectable Outputs: HDMI 2.0 up to 4096*2160 @60Hz, progressive 4:4:4 RGB.
- 2 frames system latency: 33ms (@V=60Hz)
- Warp engine for geometry alignment up to 120x68 control points.
- Maximum geometry adjustment up to 1200 pixels in both H&V directions for each corner.
- Support W shape Corner Wall adjustment in H&V at flexible location.
- Support Linearity Grid Line adjustment for quick H&V line position alignment. It is good for the line gap adjustment on curved screen display.
- Edge Mask with 8 control points up to 900 pixels at each control point in H&V directions.
- Embedded video wall function for image split, cropping and aspect ratio adjustment.
- Selectable geometry alignment grid size from 8-120 pixels in H&V direction. Default is 32*32 pixels.
- Selectable grid pattern color with optional transparency to allow user to apply external test pattern.
- Flexible aspect ratio adjustment in each edge up to +_ 1800 pixels position shift.
- 3D format conversion: Convert 3D input signal into Side by Side, Top/Bottom and frame sequential output signal for passive 3D and active 3D displays.
- OSD menu location is adjustable.
- 10-bit processor, 3:2/2:2 cadence, low angle smooth algorithm, high quality scaling engine.
- 3D motion adaptive de-interlace.
- Frame lock function to get perfect synchronized outputs in multi-unit application.
- Frame rate conversion and 50Hz in/out function to eliminate image frame drop or repeat.
- Support xvYCC & 8/10/12-bit deep color processing.
- Automatically support HDR 10 input signal processing with SDR full color RGB 4:4:4 output.
- 90/180/270 rotation, flip, cropping, scaling & color adjustment up to 4k/2k 60Hz input signal. User can do more rotation angle fine-tune through geometry alignment.
- PIP/POP function with PIP image size from 320*180 up to 1920*1200 resolution with flexible position and adjustable aspect ratio.
- 2/3/4 split view.
- Quick seamless swap between two input signals.
- Selectable and programmable EDID in the range: H=1024-4080, V=720-3840.
- User can save up to 10 settings that can be recalled at any time.
- ESD Protection: ±15kV (Air-gap discharge), ±8kV (Contact discharge)
- Working environment: 40 degree C, 10-90% RH
- Control: IR, RS232, USB, Ethernet
- CE/FCC/RoHS Certified
- Power supply: DC 12V 2A, Power consumption: DC 12V/1.1A (13.2W)
- Dimension and weight (Body Only): 303mm*190mm*40mm, 1.2Kg
- 2 Year Warranty, paid extension available up to 5 years.
