G406 Quad CH Video wall controller with matrix
Quick Overview
GeoBox G406 is new generation 4k/2k 60fps four screens video wall controller to allow great freedom in creating any scale video wall with multiple contents and different LCD arrays. It incorporates two HDMI 2.0, two DisplayPort 1.2 inputs and two HDMI 2.0 loop-through ports with HDCP 2.2/1.4 as well as four synchronized Full HD outputs. Each output has independent image rotation/flip, scaling, cropping and color adjustment. Support true 4k/2k video wall with pixel to pixel video quality.
G406 is designed with 2x4matrix switch and can display independent content in each monitor with portrait and landscape display. It can display 1, 2, 3 or 4 independent contents on four LCD video wall. Two HDMI 2.0 loop-through ports are designed for multiple unit cascade and allows user to select different contents for entire video wall.
The monitors can be installed at landscape or portrait position or combination. Pixel base image position adjustment can active precise besel compensation as well as to correct the mis-alignment in monitor installation. Big range of Overlap adjustment function and image rotation can adjust the aspect ratio in the video wall or create asymetric video wall with panel at landscape and portrait or combination. Multiple units of G400 can build big scale of video wall without monitor number limitation.
One of the application is to split signal source into 4x WUXGA resolution for projector edge blending. It can set required overlap pixels based on the overlap region between adjacent projectors. User can also prepare a backup signal source at hand. When one signal source is broken down, user can switch to the second signal source in few seconds.
It is pure hardware, standalone system with easy-of-use. All operations can be implemented through front panel keypads, IR remote controller, USB, RS232 or Ethernet. No additional PC, Zero Client or software tool is required.
Specification
- Input: 2x HDMI 2.0b for all channels, 1x DP1.2a for CH 1/2, 1x DP1.2a for CH 3/4
- Output: 4x HDMI up to 1080P & WUXGA
- 2x HDMI 2.0 loop out ports for multiple unit cascade & daisy chain connection
- HDMI: HDCP V2.2/V1.4, DP: HDCP: V1.3
- Max. input resolution: 4096x2160 @60Hz for both HDMI 2.0 & DP 1.2
- Support 3840x2400 @30Hz input
- Support non-VESA STD input timings
- Support pixel to pixel 4k/2k display
- Selectable output up to 1920x1200, 2048*1080 60Hz
- 10-bit processor, frame rate conversion
- 4:4:4 Chroma sampling, 30 Color bits
- Support sRGB & xvYCC color processing & 8/10-bit deep color output.
- 3:2/2:2 cadence, low angle smooth algorithm, high quality scaling engine
- Pixel base position alignment up to +_ 1800 pixels in H&V for flexible image capture, cropping, position alignment, bezel compensation & irregular video wall.
- Set overlap output up to 1800 pixels for projector edge blending application.
- 3D motion adaptive de-interlace
- Frame lock for synchronized outputs
- Support High Dynamic Range (HDR) input signal: SMPTE ST-2084, SMPTE ST-2086. Output with SDR full color RGB 4:4:4 progressive signal.
- Individual 90/180/270 rotation, flip, cropping, scaling & color adjustment in each channel
- Matrix switch for multi-window display
- Embedded HDMI/DP audio in each output
- Selectable and programmable EDID
- ESD Protection: ±15kV (Air-gap discharge), ±8kV (Contact discharge)
- DC 12V/1.1A, max. 13.2w, (100-240 VAC PSU)
- Working environment: 45 degree C, 10-90% RH
- Control: Front panel keypads, IR, RS232, USB, Ethernet
- Dimensions: 440mm*186mm*44mm, Weight: 2.13kg
- CE/FCC/RoHS/Green Certified
- 2 Year Warranty, extension program up to 5 years is available.
