Call:886-2-2792-2819

G406s Dual CH video wall controller

Quick Overview

GeoBox G406s is simplified version of G406L Video Wall controller. It incorporates 1x HDMI 2.0 input and 1x HDMI 2.0 loop out port to support up to DCi/UHD 60 fps input signal as well as two synchronized Full HD outputs. Each output has independent image rotation/flip, scaling, cropping and color adjustment to allow great freedom in creating overlap pixels for projector edge blending and any scale video wall. It is also a 3D decoder to decode side by side or top/bottom 3D format with RH/LH output for passive 3D.

The major application for G406s is dual monitor video wall with monitor at portrait and landscape or combination. It can be cascaded with G408 to build 3x3 video wall. Another application is to split the signal source and set overlap pixel for projector edge blending system. Under this condition, user can connect signal with all kind of sources with different resolution. It will greatly increase the flexibility for signal connection and reduce the setup time. G406s is pure hardware, standalone system with easy-of-use. All operations can be implemented through IR remote controller, USB, RS232 or Ethernet. No additional PC or appropriate software tool is required.
 

  • Input: 1x HDMI 2.0b
  • Output: 2x HDMI up to 2048x1080 @60Hz, RGB 4:4:4 progressive.
  • 1x HDMI 2.0 loop out port for multiple unit cascade & daisy chain connection.
  • HDCP V2.2/V1.4 compliant.
  • Max. input resolution: 4096x2160 @60Hz & 7680x1200 @30Hz
  • Support non-VESA STD input timings.
  • Input: 4:4:4 Chroma sampling, 30 Color bits.
  • Support sRGB & xvYCC color processing & 8/10-bit deep color output.
  • 3:2/2:2 cadence, low angle smooth algorithm, high quality scaling engine.
  • Flexible aspect ratio adjustment in each edge up to +_ 1800 pixels.
  • 50Hz in/out to avoid video artifact.
  • 10-bit processor, frame rate conversion.
  • 3D motion adaptive de-interlace.
  • Frame lock for synchronized outputs.
  • Support High Dynamic Range (HDR) input signal: SMPTE ST-2084, SMPTE ST-2086. Output with SDR full color RGB 4:4:4 progressive signal.
  • Individual 90/180/270 rotation, flip, cropping, scaling & color adjustment in each channel up to 4k/30Hz input.
  • Embedded HDMI audio in each output.
  • Selectable and programmable EDID.
  • ESD Protection: ±15kV (Air-gap discharge), ±8kV (Contact discharge).
  • DC 12V/1.1A, max. 8w, (100-240 VAC PSU)
  • Working environment: 45 degree C, 10-90% RH
  • Control: IR, RS232, USB, Ethernet
  • Dimensions: 220mm*160mm*40mm, Weight: 1.1 kg
  • CE/FCC/RoHS/Green Certified 
  • 2 Year Warranty, paid extension is available.