Call:886-2-2792-2819

M811L WUXGA warping box

Quick Overview

M811 Lite (M811L) is upgrade model from G116 series. The major difference is to support 17*9 geometry alignment and 120*68 control points fine-tune in IR controller & PC Tool. Complete new GCT PC tool is adopted. It provides more friendly interface for PC tool operation and increase the accuracy. User can swap between GCT and IR control operations at any time. It supports up to 7680*2160/30Hz input resolution without additional settings.

M811L is multi-purpose warping box with multiple functions for projector display. Multi-units can be cascaded for large scale display.

4 input ports (2x HDMI, 1x DP, 1x VGA) and 1x HDMI output port are designed in M811L. Digital input supports up to 7680*2160 @30Hz and 5760*1200 @60Hz with 4:4:4 full color sampling. Output supports up to 2048*1080 @60Hz. It is integrated with 10-bit high end processor, motion adaptive de-interlace, low angle smooth algorithm, 3:2/2:2 pull-down and supports non-VESA standard input timing. Programmable EDID can optimize input timing to get the best video result.

Advanced warp technology is embedded in M810. User can use IR controller, USB, WebPage and Ethernet to perform edge blending and sophisticated geometry alignment up to 120x68 control points. Linearity Grid Line Adjustment for compete line movement up to 17x9 control point and “W” type Corner Wall image adjustment are new functions in geometry alignment. Video wall function is to split and allocate source image. Overlap function is to crop image at desired location, shift image position and change aspect ratio.

HDMI loop out is designed for signal source monitoring and multi-unit daisy chain connection.

PIP (picture in picture) and POP (Picture outside Picture) are standard functions in M811L. PIP image size is from 320*180 up to 1920*1200 with flexible position and aspect ratio adjustment. Overlap function allows further image size, aspect ratio and cropping area adjustment in PIP window.

M811L is an ideal processor for image stacking, geometry alignment, PIP, POP, image format conversion, de-interlacing, image rotation and mobile mirror image displayed on portrait TV. It provides easy configuration, low entry barrier, cost effective, reliable and flexible solution.

  • Input: 2x HDMI 2.0b, 1x DP1.2a and 1x VGA
  • Output: 1x HDMI 1.4b
  • Loop output: 1x HDMI 2.0b for cascade.
  • HDCP compliance: Input: HDMI: HDCP V2.2/V1.4, DP: HDCP: V1.3, Output: HDCP V1.4.
  • input resolution: 7680*2160 @30Hz, 5760*1200 @60Hz, 4096*2160 @60Hz
  • Input supports progressive and interlaced RGB/YUV signal, 4:4:4 Chroma sampling, up to 30 Color bits.
  • Support non-VESA standard input timings for easy connection with various signal sources.
  • Output up to 2048*1080/60, progressive 4:4:4 RGB, 15 selectable Output resolutions.
  • 2 frames system latency: 33ms (@V=60Hz)
  • Warp engine for geometry alignment up to 17*9 control points in IR control and GCT PC Tool.
  • 120x68 grid pixel position fine-tune. Each control point can be adjusted with 1/4 pixel/step and moved up to 12.5 pixels adjustment range. Maximum adjusting points are 100 points. up to 12.5 pixels adjustment range. Maximum adjusting points are 100 points.
  • Geometry adjustment range up to 600 pixels in both H&V directions.
  • Support Corner Wall adjustment in H&V at flexible location.
  • Support Linearity Grid Line adjustment for quick H&V line position alignment.
  • Edge Mask with 8 control points up to 900 pixels at each control point in H&V directions.
  • Embedded video wall function for image split, cropping and position adjustment.
  • Selectable grid pattern size from 8-120 pixels in H&V direction. Default is 32*32 pixels.
  • Selectable grid pattern color with optional transparency to see background image for external pattern.
  • Flexible aspect ratio adjustment in each edge up to +_ 1800 pixels position shift.
  • 10-bit processor, 3:2/2:2 cadence, low angle smooth algorithm, high quality scaling engine.
  • 3D motion adaptive de-interlace.
  • Frame lock function to get perfect synchronized outputs while multiple units are cascaded.
  • Support xvYCC & 8/10/12-bit deep color processing.
  • Individual color adjustment in each processing channel.
  • Individual 90/180/270 rotation, flip, cropping, scaling & color adjustment.
  • PIP/POP function with PIP image size from 320*180 up to 1920*1200 resolution with flexible position and adjustable aspect ratio. This function is not available when the main image is 90/270 degrees rotation.
  • Selectable and programmable EDID in the range: H=1024-3840, V=720-2400.
  • User can save up to 5 settings and can be recalled by remote controller, RS232, USB or network.
  • ESD Protection: ±15kV (Air-gap discharge), ±8kV (Contact discharge)
  • Working environment: 40〫C, 10-90% RH
  • Control: keypads, IR, RS232, USB, Ethernet
  • Power supply: DC: 12V 2A, Max. Power consumption: 12V/0.7A, 8.4W
  • Dimensions (Body only): Without protruding parts: 303mm*164mm*44mm.
  • Weight (Body only): 1.5kg
  • CE/FCC/RoHS Certified 
  • 2 Year Warranty, paid extension available up to 5 years.